GamaKay K61 Mechanical Keyboard 61 Keys 60 Keyboard Hot Swappable Type-C 3.1 Wired USB Translucent Glass Base Gateron Switch ABS Two-color Keycap NKRO RGB Gaming Keyboard

This is a Pre-Order product. Orders will be shipping in June 2023.
Welcome to the board that started it all, the Freebird60 is sitting on the precedent of what we've always wanted, something that's easily affordable, accessible, and ready to go for anyone new to this hobby, this is the whole kit, just grab some switches and keycaps and you'll be ready to go! 
World's first keyboard to include Durock v2 screw-in stabilizers!(If you're looking for the case only, click HERE!)
FB60 Full Kit Includes:



E-Coated Machined Aluminum 60% Case (Available in Black, Navy (Pantone: 2188CP), Olive (Pantone: 5757C), and White)

Switch Plate Available in White POM, Black FR4, or Aluminum. (Brass plate can be purchased separately on our website.) 
FB60 Hot-Swappable PCB (Both QMK & Via Compatible) [MX Only]
Durock V2 Screw-in Stabilizers

Silicone Dampener and Feet         
Rubber O-rings and 2M Screws



Extra Plates & PCBs:
- White POM & FR4
- Aluminum
- Brass
- FB60 Hot-Swap PCB
Case Specs:
- Weight: 922 Grams or 2.03 Pounds Fully Built with Switches and Stabilizers- Typing Angle: 5 degrees- Electrophoresis Coating for a soft, smooth finish- O-ring Tray Mount- USB-C Connection

O-Ring Mod Tutorial 
FB60 Review Videos
Jaeyou Park
KeebWorm
Please note that this is a GB/Pre-order, there may be delays and the timeline is just an estimate. By purchasing this, you agree that you will be charged right away and there are no cancellations, no exceptions. Please keep in mind that product colors might not exactly match the colors displayed on the renders. 
*This is a Group Buy/Pre-order product, if you include any in-stock items with the order, they will be shipped at the same time, if you want the in-stock items ASAP, please order separately, thank you!*

- Pre-order product, shipping in April 2023
- Freebird60 is an affordable and accessible kit for anyone new to the hobby
- Includes E-Coated Machined Aluminum 60% Case, Switch Plate, FB60 Hot-Swappable PCB, Durock V2 Screw-in Stabilizers, Silicone Dampener and Feet, Rubber O-rings and 2M Screws
- Extra plates and PCBs available in White POM & FR4, Aluminum, and Brass
- Typing angle: 5 degrees, Weight: 922 grams or 2.03 pounds fully built with switches and stabilizers
- Electrophoresis Coating for a soft, smooth finish, O-ring Tray Mount, USB-C Connection
- GB/Pre-order, there may be delays and the timeline is just an estimate
- No cancellations, no exceptions
- Product colors might not exactly match the colors displayed on the renders
- Group Buy/Pre-order product, in-stock items will be shipped at the same time

[Pre-Order] Freebird60 Full Kit

Ready to use Tofu60 2.0 Hot-swap Keyboard With NP Blue Gray 🚀In Stock $220.00 USD 🔴Just 4 remaining Case Layout WK HHKB WKHHKB Case Anodized Black Anodized Silver Anodized Brown E-coating Snow Anodized Gray Anodized Burgundy Red E-coating Red Anodized Cute Anodized BlackAnodized SilverAnodized BrownE-coating SnowAnodized GrayAnodized Burgundy RedE-coating RedAnodized Cute ANSI Plate Carbon fiber FR4 Aluminum Polycarbonate Carbon fiberFR4AluminumPolycarbonate The PCB must be added to the cart with the kit together. PCB(+ $50.00 USD) 1.2 mm Flex cut Hot-swap PCB(+ $50.00 USD) 1.2 mm Non-Flex cut Solder PCB(+ $45.00 USD) Assembled Layout WK WK HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $73.00 USD to the price WK / Anodized Black / Carbon fiber WK / Anodized Black / FR4 WK / Anodized Black / Aluminum WK / Anodized Black / Polycarbonate WK / Anodized Silver / Carbon fiber WK / Anodized Silver / FR4 WK / Anodized Silver / Aluminum WK / Anodized Silver / Polycarbonate WK / Anodized Brown / Carbon fiber WK / Anodized Brown / FR4 WK / Anodized Brown / Aluminum WK / Anodized Brown / Polycarbonate WK / E-coating Snow / Carbon fiber WK / E-coating Snow / FR4 WK / E-coating Snow / Aluminum WK / E-coating Snow / Polycarbonate WK / Anodized Gray / Carbon fiber WK / Anodized Gray / FR4 WK / Anodized Gray / Aluminum WK / Anodized Gray / Polycarbonate WK / Anodized Burgundy Red / Carbon fiber WK / Anodized Burgundy Red / FR4 WK / Anodized Burgundy Red / Aluminum WK / Anodized Burgundy Red / Polycarbonate WK / E-coating Red / Carbon fiber WK / E-coating Red / FR4 WK / E-coating Red / Aluminum WK / E-coating Red / Polycarbonate WK / Anodized Cute / Carbon fiber WK / Anodized Cute / FR4 WK / Anodized Cute / Aluminum WK / Anodized Cute / Polycarbonate HHKB / Anodized Black / Carbon fiber HHKB / Anodized Black / FR4 HHKB / Anodized Black / Aluminum HHKB / Anodized Black / Polycarbonate HHKB / Anodized Silver / Carbon fiber HHKB / Anodized Silver / FR4 HHKB / Anodized Silver / Aluminum HHKB / Anodized Silver / Polycarbonate HHKB / Anodized Brown / Carbon fiber HHKB / Anodized Brown / FR4 HHKB / Anodized Brown / Aluminum HHKB / Anodized Brown / Polycarbonate HHKB / E-coating Snow / Carbon fiber HHKB / E-coating Snow / FR4 HHKB / E-coating Snow / Aluminum HHKB / E-coating Snow / Polycarbonate HHKB / Anodized Gray / Carbon fiber HHKB / Anodized Gray / FR4 HHKB / Anodized Gray / Aluminum HHKB / Anodized Gray / Polycarbonate HHKB / Anodized Burgundy Red / Carbon fiber HHKB / Anodized Burgundy Red / FR4 HHKB / Anodized Burgundy Red / Aluminum HHKB / Anodized Burgundy Red / Polycarbonate HHKB / E-coating Red / Carbon fiber HHKB / E-coating Red / FR4 HHKB / E-coating Red / Aluminum HHKB / E-coating Red / Polycarbonate HHKB / Anodized Cute / Carbon fiber HHKB / Anodized Cute / FR4 HHKB / Anodized Cute / Aluminum HHKB / Anodized Cute / Polycarbonate Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready to use Tofu60 2.0 Hot-swap Keyboard With NP Blue Gray - WK / Anodized Black / Carbon fiber is backordered and will ship as soon as it is back in stock. SKU: ZH12973 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Aluminum case (anodized and electrostatically coated) PC/ Aluminum/ Fiberglass/ Carbon fiber plate PCB: 1.2 mm Flex cut Hot-swap PCB/1.2 mm Non-Flex cut Solder PCB, QMK firmware, VIA support, without per-key RGB/RGB underglow, USB-C port, with daughterboard+JST cable Brass weight (transparent E-coating after sandblasting) Top mount, silicone socks, silicone bowl, 3 types of structural support Flex cut PCB, thickness 1.2 mm USB-C daughterboard support ≈1.4 kg before assembly Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7° Design by KBDfans Made in China Keycaps: Keycaps: NP Blue Gray Include Price $147 includes below items: Aluminum top and bottom case x1 Brass weight bar x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set Keycaps Base kit x1 The following accessories should be purchased separately and added to the cart with the kit together: 1.2 mm Flex cut Hot-swap PCB x1 (+ $50 USD) or1.2 mm Non-Flex cut Solder PCB x1 (+ $45 USD) Plate x1 (+ $19 USD) Dimension Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 2 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Click here for more about Tofu60 2.0 kit 

- Tofu60 2.0 Hot-swap Keyboard with NP Blue Gray is in stock
- Price: $220.00 USD
- Case Layout options: WK, HHKB
- Case options: Anodized Black, Anodized Silver, Anodized Brown, E-coating Snow, Anodized Gray, Anodized Burgundy Red, E-coating Red, Anodized Cute
- Plate options: Carbon fiber, FR4, Aluminum, Polycarbonate
- Assembled Layout options: WK, HHKB
- Split keys available
- Mounting style: Top mount
- Switch options available (prices vary)
- Switch details provided for each option
- Switch lube service available (additional cost)
- Stabilizers foam sticker installation available (additional cost)
- Quantity selection available
- Includes aluminum case, hot-swappable PCB, USB-C daughterboard, brass weight, screws, silicone bowl, silicone socks, bottom poron, plate poron, EVA switch pad, Cherry screw-in stabilizers, rubber feet, keycaps
- Building tutorial and firmware flash manual provided
- Disclaimer regarding case and brass weight appearance
- 2 layouts available
- New design with 3 different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount

Ready to use Tofu60 2.0 Hot-swap Keyboard With NP Blue Gray

Drop + Tokyo Keyboard Tokyo60 Keyboard Kit

D60Lite x GMK PHARAOH Limited Stock $119.00 🔴Just 5 remaining D60Lite x GMK PHARAOH HHKB Layout HHKB Layout HHKB Layout Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Buy it nowMore payment options D60Lite x GMK PHARAOH - HHKB Layout is backordered and will ship as soon as it is back in stock. SKU: DP3370 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Update Selling exrta in-stock (2022-07-19) Starting the shipment from July 20th (2022-07-13) The sample of D60 Lite collab project is completed. To decrease the noise during typing and offer a better typing experience, we updated the structure to Leaf spring mount, with silicone socks set& Tape Mod& Bottom Foam (2022-06-13) The new mold is completed. Testing the samples of D60 lite collab project（2022-05-01） The new mold is expected to be completed by the end of April. （2022-04-15） Delayed because there are some issues in the molds and it did not pass our QC. Will keep updating once we get more info.(2022-03-17) In production (2021-11-03) To get a new mold for the manufacturer to produce（2021-09-24） To all the customers who have joined the D60lite Group BuyWe are sorry to inform you about the delay on D60lite. We have tested multiple times for all the samples we get from the manufacture. However, none of them meet our QC requirements. So we decided to get a new mold for the manufacture to produce.The delay on all the D60lite will be at least 2 months from now.As compensation KBDfans will offer a free carrying case for all the customers who have bought D60lite.Again, sorry for your inconvenience. We will try our best to solve this for you ASAP, and thank you for choosing KBDfans. (2021-8-30) Group Buy Date: Start from August 20th to Sep 21st, 2021 Estimated Ship Date: July 20th, 2022 Reminder 1. Based on providing a more flexible typing experience on D60lite, the USB port design is not perfectly centered. 2. D60Lite x GMK PHARAOH doesn't come with the keycaps. Assembly Service Hot-swap PCB assembly service: Link Specs PCB: DZ60RGB-WKL/DZ60RGB ANSI V2, RGB hot-swappable PCB ( QMK and VIA supportable, Type-C, support Windows, Mac, Linux ) Plate:Injection Polycarbonate Stabilizers: Cherry screw-in stabs Silicone socks set Mute mat: install between PCB and Plate Tape Mod + Bottom Foam Case: PC+ABS material, using an injection molding process, the surface is matte, opaque USB-C Cable Colors: color matched with GMK PHARAOH Typing angle: 6° Structure: Leaf spring mount（with gasket socks) Layout：60% WK and HHKB Designers: KBDfans Wei ( D60lite );SxM Designs ( GMK PHARAOH ) D60lite Build Tutorial Link Include Top and Bottom case x1 Polycarbonate plate x1 PCB x1 PCB foam x1 Bottom foam x1 Switch pads x1 Silicone socks set x1 Designed tape mod x1 Cherry stabs kit x1 USB-C cable x1 Rubber feet x1 Carrying case x1 Firmware New Flash Manual Firmware(WK) dztech_dz60rgb_ansi_v2_via.bin Firmware(HHKB) Dztech_dz60rgb_wkl_v3_via.bin Include Top and Bottom case x1Polycarbonate plate x1PCB x1PCB foam x1Bottom foam x1Switch pads x1Silicone socks set x1Designed tape mod x1Cherry stabs kit x1USB-C cable x1Rubber feet x1Carrying case x1 Layout Size and Typing angle 

 Pre-installed 6.25u spacebar stabilizer and 2u stabilizersCase: Aluminum CNC case with sandblasted and anodized finish

Product: D60Lite

- Update:
  - Extra in-stock (2022-07-19)
  - Starting the shipment from July 20th (2022-07-13)
  - Updated the structure to Leaf spring mount, with silicone socks set& Tape Mod& Bottom Foam (2022-06-13)
  - New mold is completed. Testing the samples of D60 lite collab project (2022-05-01)
  - New mold is expected to be completed by the end of April (2022-04-15)
  - Delayed because there are some issues in the molds and it did not pass our QC (2022-03-17)
  - In production (2021-11-03)
  - To get a new mold for the manufacturer to produce (2021-09-24)
  - As compensation KBDfans will offer a free carrying case for all the customers who have bought D60lite (2021-8-30)

- Group Buy Date:
  - Start from August 20th to Sep 21st, 2021
  - Estimated Ship Date: July 20th, 2022

- Reminder:
  - Based on providing a more flexible typing experience on D60lite, the USB port design is not perfectly centered.
  - D60Lite x GMK PHARAOH doesn't come with the keycaps.

- Assembly Service:
  - Hot-swap PCB assembly service: Link

- Specs:
  - PCB: DZ60RGB-WKL/DZ60RGB ANSI V2, RGB hot-swappable PCB ( QMK and VIA supportable, Type-C, support Windows, Mac, Linux )
  - Plate: Injection Polycarbonate
  - Stabilizers: Pre-installed 6.25u spacebar stabilizer and 2u stabilizers
  - Case: Aluminum CNC case with sandblasted and anodized finish

D60Lite x GMK PHARAOH



• Switch: Jelly Pink
• Interface: USB Type C
• Macro: Akko Macro V1.0
• N-Key Rollover: Supported
• Disable Winlock: Supported
• Backlit: RGB backlit
• Hot-Swappable: Yes
• Model: ACR59
• Dimensions: 292*101*37mm
• Weight: Approximately 0.5KG
• Material: PBT Material
• Profile: Cherry
• Printing Technology: Dye-Sublimation
• Side-Printed: N/A

ACR59 World Tour Tokyo

Our version of the Bakeneko60 features a few key changes from kkatano's original design: We closed the bottom holes, added cutouts to the plate (to allow for assembly removal), and modified the case to be made using a casting process. We also designed our own PCBs (hotswap & solder) with multiple layout support.

Bakeneko60

Information Status: 01/04/23 - PROJECT HAS BEEN FULFILLED.Status: 12/29/22 - UNITS HAVE ARRIVED, QC IS FINISHED, AWAITING ACCESSORY ITEMSStatus: 11/19/22 - UNITS ARE IN TRANSIT TO VENDORS
Design Inspiration
The Nazaré 1-60 by Nazaré Engineering takes after the Portuguese city home to the largest ocean waves on Earth. Nazaré Engineering stands for a breathtakingly large wave of innovation and brilliant design. Through this company vision and meticulous attention to detail, the Nazaré 1-60 was designed to look special, feel premium, and sound elegant.
Included with kit Nazaré 1-60 Keyboard
Default Anodized Black Aluminum Plate - ANSI layout (ISO is available upon request)
PCB, USB-C Daughterboard, and JST Cable
All Necessary O-Rings, Bumpons, and Screws
Hex Key
Custom Microfiber Cloth
Custom Carrying Case
Auth card Pricing & Add-ons Kit Price: 650 USD
Extra Anodized Black Aluminum Plate Add-on (of either ISO or ANSI layout): 35 USD
Extra PCB, USB-C Daughterboard, and JST Cable Add-on: 65 USD
Extra Forged Carbon Fiber Plate Add-on (of either ISO or ANSI layout): 45 USD Specifications 6063 Aluminum Case
Color Options: E-White Top w/ Anodized Black Bottom and Anodized Black Top w/ E-White Bottom
Bead-Blasted Stainless Steel Bottom Right Blocker Badge
Default Anodized Black Aluminum Plate (of either ISO or ANSI layout)
Eight 50A Silicone O-Rings
Four Different Bottom Accent Weights:
Bead-Blasted Stainless Steel Weight #1
Bead-Blasted Copper Weight #2
Ocean Blue Polycarbonate "Weight" #3
Bead-Blasted Brass Weight #4 Features Bottom Right Blocker 60%
“Rail-Ring” Gasket Mount System
6.9 Degree Typing Angle
Low Front Height (≈17.4mm)
Seamless Case Design
Centered USB-C Unified C3 Daughterboard (Designed by ai03 and friends)
Solder PCB - Compatible with QMK and VIA (Designed by Gondolindrim)
Supported Layouts (ANSI & ISO) Disclaimer
We highly recommend opting in for Route Shipping Insurance at checkout, as this is the only way your order will be covered should you experience an issue. As the sales portal, we are not responsible in any way for lost/stolen/damaged items, and by opting out of Route, you acknowledge there is no way to make a claim should there be an issue.Read more here on making a claim.
Keycaps and accessory items are shown for demonstrative purposes only and are not included with the purchase of this keyboard kit. Shipping & Returns RETURNS POLICY Last updated January 01, 2020 If you are not completely satisfied with your purchase for any reason, you may return it to us for a full refund. Please see below for more information on our return policy. RETURNS All returns must be postmarked within fourteen (14) days of the receiving date listed on the tracking page for the item. All returned items must be in new and unused condition, with all original packaging and protective shipping material inside.
The customer will be responsible for returning the item back to us via a trackable postal carrier. RETURN PROCESS To return an item, please begin the process here to obtain a Return Merchandise Authorization (RMA) number. REFUNDS After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least three (3) days from the receipt of your item to process your return. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. We will notify you by email when your return has been processed.
Please note that we must pass along the 4% payment processing fee for any approved returns. EXCEPTIONS The following items cannot be returned: ● DIY cable kits ● Standalone cable parts ● PCB's that have been used For defective or damaged products, please contact us through the support page to arrange a refund or exchange. QUESTIONS If you have any questions concerning our return policy, please contact us here.

 a claim with Route.

• The Nazaré 1-60 by Nazaré Engineering is a mechanical keyboard inspired by the Portuguese city home to the largest ocean waves on Earth.
• Included with the kit is a default anodized black aluminum plate (ANSI layout, ISO is available upon request), PCB, USB-C daughterboard, JST cable, O-rings, bumpons, screws, hex key, microfiber cloth, carrying case, and auth card.
• Pricing & Add-ons: Kit Price: 650 USD, Extra Anodized Black Aluminum Plate Add-on (of either ISO or ANSI layout): 35 USD, Extra PCB, USB-C Daughterboard, and JST Cable Add-on: 65 USD, Extra Forged Carbon Fiber Plate Add-on (of either ISO or ANSI layout): 45 USD.
• Specifications: 6063 Aluminum Case, Color Options: E-White Top w/ Anodized Black Bottom and Anodized Black Top w/ E-White Bottom, Bead-Blasted Stainless Steel Bottom Right Blocker Badge, Default Anodized Black Aluminum Plate (of either ISO or ANSI layout), Eight 50A Silicone O-Rings, Four Different Bottom Accent Weights: Bead-Blasted Stainless Steel Weight #1, Bead-Blasted Copper Weight #2, Ocean Blue Polycarbonate "Weight" #3, Bead-Blasted Brass Weight #4.
• Features: Bottom Right Blocker, 60% “Rail-Ring” Gasket Mount System, 6.9 Degree Typing Angle, Low Front Height (≈17.4mm), Seamless Case Design, Centered USB-C Unified C3 Daughterboard (Designed by ai03 and friends), Solder PCB - Compatible with QMK and VIA (Designed by Gondolindrim), Supported Layouts (ANSI & ISO).
• Disclaimer: We recommend opting in for Route Shipping Insurance at checkout, as this is the only way your order will be covered should you experience an issue.

Nazaré 1-60 W1 Accessories

Ready To Use Tofu60 2.0 Hot-swap Keyboard 🚀In Stock $209.00 USD 🔴Just 7 remaining Case E-coating Snow Anodized Black Anodized Silver Anodized Burgundy Red Anodized Gray Anodized Cute Anodized Pine Green Anodized Brown E-coating SnowAnodized BlackAnodized SilverAnodized Burgundy RedAnodized GrayAnodized CuteAnodized Pine GreenAnodized Brown Case Layout WK WKL HHKB WKWKLHHKB ANSI Plate Polycarbonate Aluminum FR4 Carbon fiber PolycarbonateAluminumFR4Carbon fiber Assembled Layout WK WK WKL HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Split keys Split Backspace (1U+1U) Split Right Shift (1.75U+1U) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $23.00 USD to the price E-coating Snow / WK / Polycarbonate E-coating Snow / WK / Aluminum E-coating Snow / WK / FR4 E-coating Snow / WK / Carbon fiber E-coating Snow / WKL / Polycarbonate E-coating Snow / WKL / Aluminum E-coating Snow / WKL / FR4 E-coating Snow / WKL / Carbon fiber E-coating Snow / HHKB / Polycarbonate E-coating Snow / HHKB / Aluminum E-coating Snow / HHKB / FR4 E-coating Snow / HHKB / Carbon fiber Anodized Black / WK / Polycarbonate Anodized Black / WK / Aluminum Anodized Black / WK / FR4 Anodized Black / WK / Carbon fiber Anodized Black / WKL / Polycarbonate Anodized Black / WKL / Aluminum Anodized Black / WKL / FR4 Anodized Black / WKL / Carbon fiber Anodized Black / HHKB / Polycarbonate Anodized Black / HHKB / Aluminum Anodized Black / HHKB / FR4 Anodized Black / HHKB / Carbon fiber Anodized Silver / WK / Polycarbonate Anodized Silver / WK / Aluminum Anodized Silver / WK / FR4 Anodized Silver / WK / Carbon fiber Anodized Silver / WKL / Polycarbonate Anodized Silver / WKL / Aluminum Anodized Silver / WKL / FR4 Anodized Silver / WKL / Carbon fiber Anodized Silver / HHKB / Polycarbonate Anodized Silver / HHKB / Aluminum Anodized Silver / HHKB / FR4 Anodized Silver / HHKB / Carbon fiber Anodized Burgundy Red / WK / Polycarbonate Anodized Burgundy Red / WK / Aluminum Anodized Burgundy Red / WK / FR4 Anodized Burgundy Red / WK / Carbon fiber Anodized Burgundy Red / WKL / Polycarbonate Anodized Burgundy Red / WKL / Aluminum Anodized Burgundy Red / WKL / FR4 Anodized Burgundy Red / WKL / Carbon fiber Anodized Burgundy Red / HHKB / Polycarbonate Anodized Burgundy Red / HHKB / Aluminum Anodized Burgundy Red / HHKB / FR4 Anodized Burgundy Red / HHKB / Carbon fiber Anodized Gray / WK / Polycarbonate Anodized Gray / WK / Aluminum Anodized Gray / WK / FR4 Anodized Gray / WK / Carbon fiber Anodized Gray / WKL / Polycarbonate Anodized Gray / WKL / Aluminum Anodized Gray / WKL / FR4 Anodized Gray / WKL / Carbon fiber Anodized Gray / HHKB / Polycarbonate Anodized Gray / HHKB / Aluminum Anodized Gray / HHKB / FR4 Anodized Gray / HHKB / Carbon fiber Anodized Cute / WK / Polycarbonate Anodized Cute / WK / Aluminum Anodized Cute / WK / FR4 Anodized Cute / WK / Carbon fiber Anodized Cute / WKL / Polycarbonate Anodized Cute / WKL / Aluminum Anodized Cute / WKL / FR4 Anodized Cute / WKL / Carbon fiber Anodized Cute / HHKB / Polycarbonate Anodized Cute / HHKB / Aluminum Anodized Cute / HHKB / FR4 Anodized Cute / HHKB / Carbon fiber Anodized Pine Green / WK / Polycarbonate Anodized Pine Green / WK / Aluminum Anodized Pine Green / WK / FR4 Anodized Pine Green / WK / Carbon fiber Anodized Pine Green / WKL / Polycarbonate Anodized Pine Green / WKL / Aluminum Anodized Pine Green / WKL / FR4 Anodized Pine Green / WKL / Carbon fiber Anodized Pine Green / HHKB / Polycarbonate Anodized Pine Green / HHKB / Aluminum Anodized Pine Green / HHKB / FR4 Anodized Pine Green / HHKB / Carbon fiber Anodized Brown / WK / Polycarbonate Anodized Brown / WK / Aluminum Anodized Brown / WK / FR4 Anodized Brown / WK / Carbon fiber Anodized Brown / WKL / Polycarbonate Anodized Brown / WKL / Aluminum Anodized Brown / WKL / FR4 Anodized Brown / WKL / Carbon fiber Anodized Brown / HHKB / Polycarbonate Anodized Brown / HHKB / Aluminum Anodized Brown / HHKB / FR4 Anodized Brown / HHKB / Carbon fiber Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready To Use Tofu60 2.0 Hot-swap Keyboard - E-coating Snow / WK / Polycarbonate is backordered and will ship as soon as it is back in stock. SKU: TFZH00550 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Aluminum case (anodized and electrostatically coated) PC/ Aluminum/ Fiberglass/ Carbon fiber plate Hot-swappable PCB, QMK firmware, VIA support, without per-key RGB Brass weight (transparent E-coating after sandblasting) Top mount, silicone socks, silicone bowl, 3 types of structural support Flex cut PCB, thickness 1.2 mm USB-C daughterboard support ≈1.4 kg before assembly Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7° Design by KBDfans Made in China Include Aluminum top and bottom case x1 Hot-swappable PCB x1 USB-C daughterboard x1 Brass weight x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set Reminder You must choose switches if you want to buy a fully assembled keyboard from us, we can't provide a pre-build service without switches. The Keycaps are not included in this particular item. If you want us to build your keyboard with the keycaps, please add the ones you like, and we will place them on for free. Dimension Estimated shipping date End of May, 2023 ANSI Layout Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 3 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Click here for more aboutTofu60 2.0 kit 

- Product: Ready To Use Tofu60 2.0 Hot-swap Keyboard
- Price: $186.00 (pre-order)
- In stock: 5
- Case: E-coating Snow Anodized Black
- Layout: WK, WKL, HHKB, ANSI
- Plate: Polycarbonate, Aluminum, FR4, Carbon fiber
- Mounting style: Top mount, Silicone socks gasket, Silicone bowl gasket (50g/60g/70g pressure), Tape Mod
- Switches: Not included, must be added to cart separately
- Stabilizers: Cherry screw-in stabilizers included
- Springs: Optional replacement service available
- USB-C daughterboard support
- Brass weight (transparent E-coating after sandblasting)
- QMK firmware, VIA support
- Made in China
- Weight: ≈1.4 kg before assembly
- Dimensions: Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7°
- Includes: Aluminum top and bottom case, hot-swappable PCB, USB-C daughterboard, brass weight, screws for top mount, silicone bowl, silicone socks, bottom poron, plate poron, EVA switch pad, rubber feet
- Group buy updates: E-coating case pre-orders to be updated, Anodized case orders May 2023
- Building tutorial and firmware flash manual available
- Disclaimer: No returns or refunds for marks or foreign material under 2 mm on keyboard case or brass weight, smearing or hook marks within case, or color differences on interior case corners. QC before building.

Ready To Use Tofu60 2.0 Hot-swap Keyboard

PausePlay% buffered00:00UnmuteMuteExit fullscreenEnter fullscreenPlay Tofu60 2.0 🚀In Stock 📦Shipping $178.00 USD 🔴Just 12 remaining Layout WK WKL HHKB WKWKLHHKB Color (*keycaps not included) E-coating Snow Anodized Grey Anodized Black Anodized Silver Anodized Burgundy Red Anodized Cute Anodized Pine Green Anodized Brown E-coating Cement gray E-coating Forest E-coating Black E-coating Lavender E-coating Cute E-coating Red E-coating Azure E-coating Linen gray E-coating SnowAnodized GreyAnodized BlackAnodized SilverAnodized Burgundy RedAnodized CuteAnodized Pine GreenAnodized BrownE-coating Cement grayE-coating ForestE-coating BlackE-coating LavenderE-coating CuteE-coating RedE-coating AzureE-coating Linen gray The PCB and Plate must be added to the cart with the kit together. PCB(+ $50.00 USD) 1.2 mm Flex cut Hot-swap PCB(+ $50.00 USD) 1.2 mm Non-Flex cut Solder PCB(+ $45.00 USD) Plate(+ $19.00 USD) At least one Plate must be selected ANSI Polycarbonate plate ANSI Polycarbonate plate(+ $19.00 USD) ANSI Aluminum plate(+ $19.00 USD) ANSI FR4 plate(+ $19.00 USD) ANSI Carbon fiber plate(+ $19.00 USD) ISO Polycarbonate plate(+ $19.00 USD) ISO Aluminum plate(+ $19.00 USD) ISO FR4 plate(+ $19.00 USD) ISO Carbon fiber plate(+ $19.00 USD) Selections will add $69.00 USD to the price WK / E-coating Snow WK / Anodized Grey WK / Anodized Black WK / Anodized Silver WK / Anodized Burgundy Red WK / Anodized Cute WK / Anodized Pine Green WK / Anodized Brown WK / E-coating Cement gray WK / E-coating Forest WK / E-coating Black WK / E-coating Lavender WK / E-coating Cute WK / E-coating Red WK / E-coating Azure WK / E-coating Linen gray WKL / E-coating Snow WKL / Anodized Grey WKL / Anodized Black WKL / Anodized Silver WKL / Anodized Burgundy Red WKL / Anodized Cute WKL / Anodized Pine Green WKL / Anodized Brown WKL / E-coating Cement gray WKL / E-coating Forest WKL / E-coating Black WKL / E-coating Lavender WKL / E-coating Cute WKL / E-coating Red WKL / E-coating Azure WKL / E-coating Linen gray HHKB / E-coating Snow HHKB / Anodized Grey HHKB / Anodized Black HHKB / Anodized Silver HHKB / Anodized Burgundy Red HHKB / Anodized Cute HHKB / Anodized Pine Green HHKB / Anodized Brown HHKB / E-coating Cement gray HHKB / E-coating Forest HHKB / E-coating Black HHKB / E-coating Lavender HHKB / E-coating Cute HHKB / E-coating Red HHKB / E-coating Azure HHKB / E-coating Linen gray Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Tofu60 2.0 - WK / E-coating Snow is backordered and will ship as soon as it is back in stock. SKU: TFZH00736 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Tofu60 2.0 Tofu60 was born in 2017 and has sold more than 40,000 units. It's a lot of people's first entry-level custom mechanical keyboard.Tofu60 2.0 is a new beginning, the new changes will bring a new typing experience, and the new surface coating process can also bring more color possibilities. Specifications Case material: Aluminum (anodized and electrostatically coated process) Plate: PC/ Aluminum/ FR4/ Carbon fiber plate PCB: 1.2 mm Flex cut Hot-swap PCB/1.2 mm Non-Flex cut Solder PCB, QMK firmware, VIA support, without per-key RGB, USB-C port, with daughterboard+JST cable Weight bar: Brass material (transparent E-coating after sandblasting process) Structure: Top mount, silicone socks, silicone bowl (3 types of structural support) Weight: ≈1.4 kg before assembly Dimesion: 294.7 mm (length) x 115.7 mm (width) x 18.5 mm (front) x 32.5 mm (back) Feature: Screwless exterior design, the dachable silicon feet hiding all the screws at the bottom Typing angle: 7° Design by KBDfans Made in China Include Price $109 includes below items: Aluminum top and bottom case x1 USB-C daughterboard x1 Brass weight x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set The following accessories should be purchased separately and added to the cart with the kit together: 1.2 mm Flex cut Hot-swap PCB x1 (+ $50 USD) or 1.2 mm Non-Flex cut Solder PCB x1 (+ $45 USD) Plate x1 (+ $19 USD) Dimension Update The pre-order colors will ship around the end of June (2023-06-08) Layout Solder version and hot-swap version kits have same layout Extra optional accessories Tofu60 2.0 Case Hot-swap PCB Foam kit Silicone bowl Silicone socks Daughterboard Silicon feet Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more Videos Features 60% Layout Programmable and supports multiple layouts Multiple colors New Mounting style Brass Weight 7° typing Angle Hot-swap PCB Supports multiple layouts 1.2 mm thickness with flex cuts Open source QMK firmware that supports VIA online configurator 3 layouts available HHKB WKL WK New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Explosion Diagram Tofu60 2.0 Pictures 

- Tofu60 2.0 is a custom mechanical keyboard
- It has a 60% layout and supports multiple layouts (HHKB, WKL, WK)
- The case is made of aluminum and comes in various colors (anodized and electrostatically coated)
- It has a hot-swappable PCB with QMK firmware and VIA support
- It includes a brass weight, top mount, silicone socks, silicone bowl, and 3 types of structural support
- The PCB has flex cuts and is 1.2mm thick
- It supports USB-C daughterboard and has a typing angle of 7°
- It weighs approximately 1.4kg before assembly
- The kit includes aluminum top and bottom case, hot-swappable PCB, USB-C daughterboard, brass weight, screws for top mount, silicone bowl, silicone socks, bottom poron, plate poron, EVA switch pad, Cherry screw-in stabilizers, and rubber feet
- The plate option needs to be paid an extra $19, not included in the kit price of $159
- The estimated shipping date for anodized case orders is May 2023
- It has a building tutorial and firmware flash manual available
- The keyboard case, brass weight, and case interior may have some smearing, hook marks, or color off, which are not eligible for return and refund
- It supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount, which provide three different typing experiences on one keyboard.

Tofu60 2.0

Ready To Use Tofu60 2.0 Hot-swap Keyboard With Cement Grey JP PBT Keycaps 🚀In Stock 📦Shipping $233.00 USD 🔴Just 2 remaining Case Anodized Gray E-coating Snow Anodized Black Anodized Silver Anodized Pine Green Anodized Brown Anodized GrayE-coating SnowAnodized BlackAnodized SilverAnodized Pine GreenAnodized Brown Case Layout WK WKL HHKB WKWKLHHKB ANSI Plate Carbon fiber FR4 Aluminum Polycarbonate Carbon fiberFR4AluminumPolycarbonate Assembled Layout WK WK WKL HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Split keys Split Backspace (1U+1U) Split Right Shift (1.75U+1U) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $23.00 USD to the price Anodized Gray / WK / Carbon fiber Anodized Gray / WK / FR4 Anodized Gray / WK / Aluminum Anodized Gray / WK / Polycarbonate Anodized Gray / WKL / Carbon fiber Anodized Gray / WKL / FR4 Anodized Gray / WKL / Aluminum Anodized Gray / WKL / Polycarbonate Anodized Gray / HHKB / Carbon fiber Anodized Gray / HHKB / FR4 Anodized Gray / HHKB / Aluminum Anodized Gray / HHKB / Polycarbonate E-coating Snow / WK / Carbon fiber E-coating Snow / WK / FR4 E-coating Snow / WK / Aluminum E-coating Snow / WK / Polycarbonate E-coating Snow / WKL / Carbon fiber E-coating Snow / WKL / FR4 E-coating Snow / WKL / Aluminum E-coating Snow / WKL / Polycarbonate E-coating Snow / HHKB / Carbon fiber E-coating Snow / HHKB / FR4 E-coating Snow / HHKB / Aluminum E-coating Snow / HHKB / Polycarbonate Anodized Black / WK / Carbon fiber Anodized Black / WK / FR4 Anodized Black / WK / Aluminum Anodized Black / WK / Polycarbonate Anodized Black / WKL / Carbon fiber Anodized Black / WKL / FR4 Anodized Black / WKL / Aluminum Anodized Black / WKL / Polycarbonate Anodized Black / HHKB / Carbon fiber Anodized Black / HHKB / FR4 Anodized Black / HHKB / Aluminum Anodized Black / HHKB / Polycarbonate Anodized Silver / WK / Carbon fiber Anodized Silver / WK / FR4 Anodized Silver / WK / Aluminum Anodized Silver / WK / Polycarbonate Anodized Silver / WKL / Carbon fiber Anodized Silver / WKL / FR4 Anodized Silver / WKL / Aluminum Anodized Silver / WKL / Polycarbonate Anodized Silver / HHKB / Carbon fiber Anodized Silver / HHKB / FR4 Anodized Silver / HHKB / Aluminum Anodized Silver / HHKB / Polycarbonate Anodized Pine Green / WK / Carbon fiber Anodized Pine Green / WK / FR4 Anodized Pine Green / WK / Aluminum Anodized Pine Green / WK / Polycarbonate Anodized Pine Green / WKL / Carbon fiber Anodized Pine Green / WKL / FR4 Anodized Pine Green / WKL / Aluminum Anodized Pine Green / WKL / Polycarbonate Anodized Pine Green / HHKB / Carbon fiber Anodized Pine Green / HHKB / FR4 Anodized Pine Green / HHKB / Aluminum Anodized Pine Green / HHKB / Polycarbonate Anodized Brown / WK / Carbon fiber Anodized Brown / WK / FR4 Anodized Brown / WK / Aluminum Anodized Brown / WK / Polycarbonate Anodized Brown / WKL / Carbon fiber Anodized Brown / WKL / FR4 Anodized Brown / WKL / Aluminum Anodized Brown / WKL / Polycarbonate Anodized Brown / HHKB / Carbon fiber Anodized Brown / HHKB / FR4 Anodized Brown / HHKB / Aluminum Anodized Brown / HHKB / Polycarbonate Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready To Use Tofu60 2.0 Hot-swap Keyboard With Cement Grey JP PBT Keycaps - Anodized Gray / WK / Carbon fiber is backordered and will ship as soon as it is back in stock. SKU: ZH10529 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Case material: Aluminum (anodized and electrostatically coated process) Plate: PC/ Aluminum/ FR4/ Carbon fiber plate PCB: 1.2 mm Flex cut Hot-swap PCB/1.2 mm Non-Flex cut Solder PCB, QMK firmware, VIA support, without per-key RGB, USB-C port, with daughterboard+JST cable Weight bar: Brass material (transparent E-coating after sandblasting process) Structure: Top mount, silicone socks, silicone bowl (3 types of structural support) Weight: ≈1.5 kg after assembly Dimesion: 294.7 mm (length) x 115.7 mm (width) x 18.5 mm (front) x 32.5 mm (back) Feature: Screwless exterior design, the dachable silicon feet hiding all the screws at the bottom Typing angle: 7° Design by KBDfans Made in China Keycaps: Cherry Profile Cement Grey Japanese PBT Dye-Sub Keycaps Set (SKU: DP2787) Include Price $160 includes below items: Aluminum top and bottom case x1 Brass weight x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set The following accessories should be purchased separately and added to the cart with the kit together: 1.2 mm Flex cut Hot-swap PCB x1 (+ $50 USD) or 1.2 mm Non-Flex cut Solder PCB x1 (+ $45 USD) with daughterboard+JST cable Plate x1 (+ $19 USD) Dimension Layout Solder version and hot-swap version kits have same layout Extra optional accessories Tofu60 2.0 Case Hot-swap PCB Foam kit Silicone bowl Silicone socks Daughterboard Silicon feet Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 3 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Click here for more aboutTofu60 2.0 kit 

 color difference, which is not eligible for Return & Refund.

Product Details:
- Aluminum case (anodized and electrostatically coated)
- PC/ Aluminum/ Fiberglass/ Carbon fiber plate
- Hot-swappable PCB, QMK firmware, VIA support, without per-key RGB
- Brass weight (transparent E-coating after sandblasting)
- Top mount, silicone socks, silicone bowl, 3 types of structural support
- Flex cut PCB, thickness 1.2 mm
- USB-C daughterboard support
- ≈1.4 kg before assembly
- Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7°
- Design by KBDfans
- Made in China

Included:
- Aluminum top and bottom case x1
- Plate x1
- Hot-swappable PCB x1
- USB-C daughterboard x1
- Brass weight x1
- Screws for top mount x1 set
- Silicone bowl (poron cotton for silicone bowl structure) x1 set
- Silicone socks x1 set
- Bottom poron x1
- Plate poron x1
- EVA switch pad x1
- Cherry screw in stabilizers x1 set
- Rubber feet x1 set
- Keycaps set x1

Estimated Shipping Date:
- End of April, 2023

Disclaimer:
- Keyboard case - If you see any resemblance of marks or foreign material under 1 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.
- Brass weight - If you see any resemblance of marks or foreign material under 1 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund.
- Case interior - Based on the production method of anodizing and spraying, the product can lead to color difference, which is not eligible for Return & Refund.

Ready To Use Tofu60 2.0 Hot-swap Keyboard With Cement Grey JP PBT Keycaps

Ashkeebs is proud to introduce Nazaré 1-60, the maiden keyboard from Nazaré Engineering! This 60% keyboard has been designed from the ground up to offer premium quality in every aspect of its design, and as such will only be available in limited quantities.
Keyboard Profile – 60% (6.9° Slope).Mounting Method – Rail-Ring.



• Nazaré 1-60 is a 60% mechanical keyboard from Nazaré Engineering
• It has been designed to offer premium quality in every aspect of its design
• It is available in limited quantities
• Keyboard Profile – 60% (6.9° Slope)
• Mounting Method – Rail-Ring

Nazaré 1-60 Keyboard Wave 1 (Extras)

• 60% burger mounted Keyboard
• FR4 plate (WKL/HHKB get Tsangan plate, WK gets Standard)
• 7.5° typing angle
• CNC aluminum case
• 20mm front height
• Aprx. 1kg without plate/PCB/switches

Brutal60

Ready To Use Tofu60 2.0 Hot-swap Keyboard With ePBT Aesthetic 🚀In Stock $280.00 USD 🔴Just 5 remaining Case E-coating Snow Anodized Cute Anodized Silver Anodized Black Anodized Gray Anodized Burgundy Red Anodized Pine Green Anodized Brown E-coating SnowAnodized CuteAnodized SilverAnodized BlackAnodized GrayAnodized Burgundy RedAnodized Pine GreenAnodized Brown Case Layout WK WKL HHKB WKWKLHHKB ANSI Plate Polycarbonate Aluminum FR4 Carbon fiber PolycarbonateAluminumFR4Carbon fiber Assembled Layout WK WK WKL HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Split keys Split Backspace (1U+1U) Split Right Shift (1.75U+1U) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $23.00 USD to the price E-coating Snow / WK / Polycarbonate E-coating Snow / WK / Aluminum E-coating Snow / WK / FR4 E-coating Snow / WK / Carbon fiber E-coating Snow / WKL / Polycarbonate E-coating Snow / WKL / Aluminum E-coating Snow / WKL / FR4 E-coating Snow / WKL / Carbon fiber E-coating Snow / HHKB / Polycarbonate E-coating Snow / HHKB / Aluminum E-coating Snow / HHKB / FR4 E-coating Snow / HHKB / Carbon fiber Anodized Cute / WK / Polycarbonate Anodized Cute / WK / Aluminum Anodized Cute / WK / FR4 Anodized Cute / WK / Carbon fiber Anodized Cute / WKL / Polycarbonate Anodized Cute / WKL / Aluminum Anodized Cute / WKL / FR4 Anodized Cute / WKL / Carbon fiber Anodized Cute / HHKB / Polycarbonate Anodized Cute / HHKB / Aluminum Anodized Cute / HHKB / FR4 Anodized Cute / HHKB / Carbon fiber Anodized Silver / WK / Polycarbonate Anodized Silver / WK / Aluminum Anodized Silver / WK / FR4 Anodized Silver / WK / Carbon fiber Anodized Silver / WKL / Polycarbonate Anodized Silver / WKL / Aluminum Anodized Silver / WKL / FR4 Anodized Silver / WKL / Carbon fiber Anodized Silver / HHKB / Polycarbonate Anodized Silver / HHKB / Aluminum Anodized Silver / HHKB / FR4 Anodized Silver / HHKB / Carbon fiber Anodized Black / WK / Polycarbonate Anodized Black / WK / Aluminum Anodized Black / WK / FR4 Anodized Black / WK / Carbon fiber Anodized Black / WKL / Polycarbonate Anodized Black / WKL / Aluminum Anodized Black / WKL / FR4 Anodized Black / WKL / Carbon fiber Anodized Black / HHKB / Polycarbonate Anodized Black / HHKB / Aluminum Anodized Black / HHKB / FR4 Anodized Black / HHKB / Carbon fiber Anodized Gray / WK / Polycarbonate Anodized Gray / WK / Aluminum Anodized Gray / WK / FR4 Anodized Gray / WK / Carbon fiber Anodized Gray / WKL / Polycarbonate Anodized Gray / WKL / Aluminum Anodized Gray / WKL / FR4 Anodized Gray / WKL / Carbon fiber Anodized Gray / HHKB / Polycarbonate Anodized Gray / HHKB / Aluminum Anodized Gray / HHKB / FR4 Anodized Gray / HHKB / Carbon fiber Anodized Burgundy Red / WK / Polycarbonate Anodized Burgundy Red / WK / Aluminum Anodized Burgundy Red / WK / FR4 Anodized Burgundy Red / WK / Carbon fiber Anodized Burgundy Red / WKL / Polycarbonate Anodized Burgundy Red / WKL / Aluminum Anodized Burgundy Red / WKL / FR4 Anodized Burgundy Red / WKL / Carbon fiber Anodized Burgundy Red / HHKB / Polycarbonate Anodized Burgundy Red / HHKB / Aluminum Anodized Burgundy Red / HHKB / FR4 Anodized Burgundy Red / HHKB / Carbon fiber Anodized Pine Green / WK / Polycarbonate Anodized Pine Green / WK / Aluminum Anodized Pine Green / WK / FR4 Anodized Pine Green / WK / Carbon fiber Anodized Pine Green / WKL / Polycarbonate Anodized Pine Green / WKL / Aluminum Anodized Pine Green / WKL / FR4 Anodized Pine Green / WKL / Carbon fiber Anodized Pine Green / HHKB / Polycarbonate Anodized Pine Green / HHKB / Aluminum Anodized Pine Green / HHKB / FR4 Anodized Pine Green / HHKB / Carbon fiber Anodized Brown / WK / Polycarbonate Anodized Brown / WK / Aluminum Anodized Brown / WK / FR4 Anodized Brown / WK / Carbon fiber Anodized Brown / WKL / Polycarbonate Anodized Brown / WKL / Aluminum Anodized Brown / WKL / FR4 Anodized Brown / WKL / Carbon fiber Anodized Brown / HHKB / Polycarbonate Anodized Brown / HHKB / Aluminum Anodized Brown / HHKB / FR4 Anodized Brown / HHKB / Carbon fiber Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready To Use Tofu60 2.0 Hot-swap Keyboard With ePBT Aesthetic - E-coating Snow / WK / Polycarbonate is backordered and will ship as soon as it is back in stock. SKU: TFZH00622 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Aluminum case (anodized and electrostatically coated) PC/ Aluminum/ Fiberglass/ Carbon fiber plate Hot-swappable PCB, QMK firmware, VIA support, without per-key RGB Brass weight (transparent E-coating after sandblasting) Top mount, silicone socks, silicone bowl, 3 types of structural support Flex cut PCB, thickness 1.2 mm USB-C daughterboard support ≈1.4 kg before assembly Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7° Design by KBDfans Made in China Keycaps: ePBT Aesthetic - Base kit (SKU: DP2069) Include Aluminum top and bottom case x1 Hot-swappable PCB x1 USB-C daughterboard x1 Brass weight x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set Keycaps Base kit x1 Dimension Estimated shipping date End of May, 2023 ANSI Layout Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 3 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Click here for more aboutTofu60 2.0 kit 

- Ready To Use Tofu60 2.0 Hot-swap Keyboard with ePBT Aesthetic is available for pre-order at $257.00
- The keyboard has an aluminum case with anodized and electrostatically coated finish
- It comes with a hot-swappable PCB, QMK firmware, and VIA support
- The keyboard has a brass weight and supports three different mounting styles: Top Mount, Gasket Mount, and Silicone bowl Gasket mount
- The keyboard has a flex cut PCB, thickness 1.2 mm, and USB-C daughterboard support
- The keyboard supports ANSI layout and has three different plate options: Polycarbonate, Aluminum, and Carbon fiber
- The keyboard comes with ePBT Aesthetic keycaps and supports various switch options
- The estimated shipping date for E-coating case pre-orders is to be updated, and for Anodized case orders is May 2023
- The keyboard has a typing angle of 7° and weighs approximately 1.4 kg before assembly
- The package includes Aluminum top and bottom case, hot-swappable PCB, USB-C daughterboard, brass weight, screws for top mount, silicone bowl, silicone socks, bottom poron, plate poron, EVA switch pad, Cherry screw-in stabilizers, and rubber feet.

Ready To Use Tofu60 2.0 Hot-swap Keyboard With ePBT Aesthetic

• 7 Layer Acrylic Keyboard Case
• 4 Layers Acrylic Keyboard Feet
• Clear bottom layer
• Clear feet layers
• 1.6mm FR4 plate
• M2x15 Brass Standoff x 8
• M2x6 Brass Standoff x 3
• M2x6 Stainless Hex Screw x 22
• 1 AN-Cv2 solderable PCB

Stacked60 Keyboard Kit

Ready To Use Tofu60 2.0 Hot-swap Keyboard With PBTfans Purpurite 🚀In Stock $278.00 USD 🔴Just 1 remaining Case Anodized Cute Anodized Silver E-coating Snow Anodized Black Anodized Gray Anodized Burgundy Red Anodized Pine Green Anodized Brown Anodized CuteAnodized SilverE-coating SnowAnodized BlackAnodized GrayAnodized Burgundy RedAnodized Pine GreenAnodized Brown Case Layout WK WKL HHKB WKWKLHHKB ANSI Plate Polycarbonate Aluminum FR4 Carbon fiber PolycarbonateAluminumFR4Carbon fiber Assembled Layout WK WK WKL HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Split keys Split Backspace (1U+1U) Split Right Shift (1.75U+1U) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $23.00 USD to the price Anodized Cute / WK / Polycarbonate Anodized Cute / WK / Aluminum Anodized Cute / WK / FR4 Anodized Cute / WK / Carbon fiber Anodized Cute / WKL / Polycarbonate Anodized Cute / WKL / Aluminum Anodized Cute / WKL / FR4 Anodized Cute / WKL / Carbon fiber Anodized Cute / HHKB / Polycarbonate Anodized Cute / HHKB / Aluminum Anodized Cute / HHKB / FR4 Anodized Cute / HHKB / Carbon fiber Anodized Silver / WK / Polycarbonate Anodized Silver / WK / Aluminum Anodized Silver / WK / FR4 Anodized Silver / WK / Carbon fiber Anodized Silver / WKL / Polycarbonate Anodized Silver / WKL / Aluminum Anodized Silver / WKL / FR4 Anodized Silver / WKL / Carbon fiber Anodized Silver / HHKB / Polycarbonate Anodized Silver / HHKB / Aluminum Anodized Silver / HHKB / FR4 Anodized Silver / HHKB / Carbon fiber E-coating Snow / WK / Polycarbonate E-coating Snow / WK / Aluminum E-coating Snow / WK / FR4 E-coating Snow / WK / Carbon fiber E-coating Snow / WKL / Polycarbonate E-coating Snow / WKL / Aluminum E-coating Snow / WKL / FR4 E-coating Snow / WKL / Carbon fiber E-coating Snow / HHKB / Polycarbonate E-coating Snow / HHKB / Aluminum E-coating Snow / HHKB / FR4 E-coating Snow / HHKB / Carbon fiber Anodized Black / WK / Polycarbonate Anodized Black / WK / Aluminum Anodized Black / WK / FR4 Anodized Black / WK / Carbon fiber Anodized Black / WKL / Polycarbonate Anodized Black / WKL / Aluminum Anodized Black / WKL / FR4 Anodized Black / WKL / Carbon fiber Anodized Black / HHKB / Polycarbonate Anodized Black / HHKB / Aluminum Anodized Black / HHKB / FR4 Anodized Black / HHKB / Carbon fiber Anodized Gray / WK / Polycarbonate Anodized Gray / WK / Aluminum Anodized Gray / WK / FR4 Anodized Gray / WK / Carbon fiber Anodized Gray / WKL / Polycarbonate Anodized Gray / WKL / Aluminum Anodized Gray / WKL / FR4 Anodized Gray / WKL / Carbon fiber Anodized Gray / HHKB / Polycarbonate Anodized Gray / HHKB / Aluminum Anodized Gray / HHKB / FR4 Anodized Gray / HHKB / Carbon fiber Anodized Burgundy Red / WK / Polycarbonate Anodized Burgundy Red / WK / Aluminum Anodized Burgundy Red / WK / FR4 Anodized Burgundy Red / WK / Carbon fiber Anodized Burgundy Red / WKL / Polycarbonate Anodized Burgundy Red / WKL / Aluminum Anodized Burgundy Red / WKL / FR4 Anodized Burgundy Red / WKL / Carbon fiber Anodized Burgundy Red / HHKB / Polycarbonate Anodized Burgundy Red / HHKB / Aluminum Anodized Burgundy Red / HHKB / FR4 Anodized Burgundy Red / HHKB / Carbon fiber Anodized Pine Green / WK / Polycarbonate Anodized Pine Green / WK / Aluminum Anodized Pine Green / WK / FR4 Anodized Pine Green / WK / Carbon fiber Anodized Pine Green / WKL / Polycarbonate Anodized Pine Green / WKL / Aluminum Anodized Pine Green / WKL / FR4 Anodized Pine Green / WKL / Carbon fiber Anodized Pine Green / HHKB / Polycarbonate Anodized Pine Green / HHKB / Aluminum Anodized Pine Green / HHKB / FR4 Anodized Pine Green / HHKB / Carbon fiber Anodized Brown / WK / Polycarbonate Anodized Brown / WK / Aluminum Anodized Brown / WK / FR4 Anodized Brown / WK / Carbon fiber Anodized Brown / WKL / Polycarbonate Anodized Brown / WKL / Aluminum Anodized Brown / WKL / FR4 Anodized Brown / WKL / Carbon fiber Anodized Brown / HHKB / Polycarbonate Anodized Brown / HHKB / Aluminum Anodized Brown / HHKB / FR4 Anodized Brown / HHKB / Carbon fiber Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready To Use Tofu60 2.0 Hot-swap Keyboard With PBTfans Purpurite - Anodized Cute / WKL / Polycarbonate is backordered and will ship as soon as it is back in stock. SKU: ZH10836 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Aluminum case (anodized and electrostatically coated) PC/ Aluminum/ Fiberglass/ Carbon fiber plate Hot-swappable PCB, QMK firmware, VIA support, without per-key RGB Brass weight (transparent E-coating after sandblasting) Top mount, silicone socks, silicone bowl, 3 types of structural support Flex cut PCB, thickness 1.2 mm USB-C daughterboard support ≈1.4 kg before assembly Length: 294.7 mm, width: 115.7 mm, front: 18.5 mm, back: 32.5 mm, typing angle: 7° Design by KBDfans Made in China Keycaps: PBTfans Purpurite - Latin Base kit (SKU: PT24-3) Include Aluminum top and bottom case x1 Hot-swappable PCB x1 USB-C daughterboard x1 Brass weight x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set Keycaps Base kit x1 Dimension Estimated shipping date End of May, 2023 ANSI Layout Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 3 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Click here for more aboutTofu60 2.0 kit 

- Ready To Use Tofu60 2.0 Hot-swap Keyboard with PBTfans Purpurite keycaps
- Available for pre-order at $255.00
- 3 in stock
- Available in different layouts: WK, WKL, HHKB, ANSI
- Available in different plate materials: Polycarbonate, Aluminum, FR4, Carbon fiber
- Available in different case colors: E-coating Snow, Anodized Black
- Available in different mounting styles: Top mount, Silicone socks gasket, Silicone bowl gasket (50g, 60g, 70g pressure)
- Hot-swappable PCB with QMK firmware and VIA support
- Brass weight with transparent E-coating after sandblasting
- Flex cut PCB with thickness 1.2 mm
- USB-C daughterboard support
- Includes keycaps, aluminum top and bottom case, hot-swappable PCB, USB-C daughterboard, brass weight, screws for top mount, silicone bowl, silicone socks, bottom poron, plate poron, EVA switch pad, Cherry screw-in stabilizers, and rubber feet
- Estimated shipping date for E-coating case pre-orders: to be updated; Anodized case orders: May 2023
- Available switch options with additional cost
- Available switch lube and springs replacement services with additional cost
- Disclaimer about the case and brass weight
- 3 different mounting styles available: Top mount, Gasket mount, Silicone bowl Gasket mount (available in 3 different hardness silicone bowls)

Ready To Use Tofu60 2.0 Hot-swap Keyboard With PBTfans Purpurite

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

Ducky One 2 Mini Pure White - RGB LED 60% Double Shot PBT Mechanical Keyboard (Cherry MX Brown) PCB

Drop Carina Mechanical Keyboard Kit

This is a great kit for anyone who wants to practice their soldering or even figure out how the electronics of a keyboard actually work!
It comes complete with all the components and instructions needed; just add switches, stabilizers keycaps and a soldering iron! Also comes with carrying case!
Build Guide HereFirmware Here

GINGHAM KEYBOARD KIT - PICNIC EDITION

Ready to use Tofu60 2.0 Keyboard With NP Blue Gray 🚀In Stock $220.00 USD 🔴Just 4 remaining Case Layout WK HHKB WKHHKB Case Anodized Black Anodized Silver Anodized Brown E-coating Snow Anodized Gray Anodized Burgundy Red E-coating Red Anodized Cute Anodized BlackAnodized SilverAnodized BrownE-coating SnowAnodized GrayAnodized Burgundy RedE-coating RedAnodized Cute ANSI Plate Carbon fiber FR4 Aluminum Polycarbonate Carbon fiberFR4AluminumPolycarbonate The PCB must be added to the cart with the kit together. PCB(+ $50.00 USD) 1.2 mm Flex cut Hot-swap PCB(+ $50.00 USD) 1.2 mm Non-Flex cut Solder PCB(+ $45.00 USD) Assembled Layout WK WK HHKB This layout must be consistent with the Case Layout Split keys Yes Split keys Split Backspace (1U+1U)(+ $0.10 USD) Split Right Shift (1.75U+1U)(+ $0.10 USD) 7U Spacebar layout(+ $0.10 USD) Mounting style Top mount Top mount Silicone socks gasket Silicone bowl gasket Bowl gasket pressure 50g pressure 50g pressure 60g pressure 60g pressure 70g pressure 70g pressure Attention: We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Select the switches x70(+ $21.00 USD) Please contact our customer service if you have more requirements! No need switches Cherry Black (+ $21.00 USD) Cherry Green (+ $31.50 USD) Cherry Grey Cherry MX Ergo Clear MX1A-H1NN Cherry MX Black Clear-Top MX2A-61NW (+ $42.00 USD) Kailh BOX Jade (+ $23.80 USD) Novelkeys x Kailh Cream (+ $45.20 USD) Gateron Ink V2 Black (+ $52.50 USD) Gateron Ink V2 Silent Black (+ $59.50 USD) Zeal Rosélios Silent Linear (+ $90.00 USD) Gateron Caps Milky Yellow (+ $24.00 USD) Gateron Oil King (+ $45.50 USD) Tecsee Sapphire (+ $30.00 USD) Tecsee Eclair Switch (+ $34.30 USD) Tecsee Purple Pandas (+ $30.10 USD) Eminence Switch (+ $41.30 USD) Emotoys Little Daisy Silent (+ $36.00 USD) Gateron G Pro 3.0 Red (+ $20.30 USD) Gateron G Pro 3.0 Brown (+ $20.30 USD) Gateron G Pro 3.0 Yellow (+ $20.30 USD) Gateron G Pro 3.0 Black (+ $20.30 USD) Gateron G Pro 3.0 Silver One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 Silver Two-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White One-stage spring (+ $21.70 USD) Gateron G Pro 3.0 White Two-stage spring (+ $21.70 USD) Jerrzi Tu Linear Switches (+ $22.00 USD) We can not build the keyboard without the switches! If you do not choose or add the switches in the cart, we will ship the kit without assemble directly. Cherry MX Black: Linear | 60 cN operating force | Plate mount 3pin Cherry MX Green: Tactile and clicky |70 cN operating force | Plate mount 3pin Cherry MX Grey: Tactile | 80 cN operating force | PCB mount 5pin Kailh BOX Jade: Clicky | 50g operating force | Plate mount 3pin NovelKeys x Kailh Cream: Linear | 55g actuation | 70g bottom out Gateron Ink v2 Black: Linear | 60 cN operating force | PCB mount 5pin Gateron Ink v2 Silent Black: Linear | 60 cN operating force | PCB mount 5pin Tecsee Sapphire: Tactile | PC mix housing | 5-pin PCB mounted | Tactile POM long stem | 2mm pre-travel | 3mm total travel | 63.5g gold-plated progressive spring | Very lightly factory lubed Gateron Caps Milky Yellow: Linear | 50 cN Operating force | Plate mounted 3 pins Gateron Oil King: Linear | Actuation: 55±5gf | Bottom Force: 65±5gf | PCB Mount 5-Pin | Factory Lubed Tecsee Purple Pandas: Tactile | 5-pin PCB mounted | Actuation: 55g | Bottom Out: 67g | Lightly Pre-Lubed Eminence Switch: Linear | Mount: 5-pin| Initial force: 45gf Min | Pressure point force: 60gf Max | Factory slightly lubed Emotoys Little Daisy Silent: Linear | Actuation force: 50±5gf | Initial force: 45gf Min | Pressure point force: 65gf Max | Factory Lubed | 5-pin Gateron G Pro 3.0 Red: Linear | Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Zeal Rosélio: Silent Linear | 67 g force | Pantone 189C stem Gateron G Pro 3.0 Yellow: Linear | Operation Force: 50±15 gf | Bottom Touching Force: 67 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Brown: Tactile | 3-Pin | Pre-lubed | Operation Force: 55±15 gf | Bottom Touching Force: 50 gf Gateron G Pro 3.0 Black: Linear | Operation Force: 60±15 gf | Bottom Touching Force: 70 gf | Pre-lubed | 3-Pin | SMD Support Gateron G Pro 3.0 Silver: Linear |Operation Force: 45±15 gf | Bottom Touching Force: 50 gf | Pre-lubed | 3-Pin | SMD Support Tecsee Eclair: Linear | Actuation: 45g±2g | Bottom-Out: 63g±2g | PCB Mount, 5-Pin | No factory Lubed Gateron G Pro 3.0 White: Linear | Pins: 3-Pin | Pre-lubed: Yes | Operation Force: 38±15gf | Bottom Touching Force: 45gf Cherry MX Black Clear-Top MX2A-61NW: Linear | 5-pin, PCB mount | Factory Lubed | Actuation force: 63,5cN Cherry MX Ergo Clear MX1A-H1NN: Tactile | 3-pin, Plate mount | Initial force: 35 cN | Actuation force: 40 cN | Pressure point force: 55 cN Jerrzi Tu switches: Linear | 5-pin | Lightly lubed Switch Lube Service-70 pcs (optional) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox AUT2045+GPL105 Mix(+ $42.00 USD) Krytox GPL205 G0(+ $49.00 USD) Krytox GPL205 G0(+ $49.00 USD) Tape Mod Adding Service Yes Install the Stabilizers foam sticker(+ $2.00 USD) Yes Selections will add $73.00 USD to the price WK / Anodized Black / Carbon fiber WK / Anodized Black / FR4 WK / Anodized Black / Aluminum WK / Anodized Black / Polycarbonate WK / Anodized Silver / Carbon fiber WK / Anodized Silver / FR4 WK / Anodized Silver / Aluminum WK / Anodized Silver / Polycarbonate WK / Anodized Brown / Carbon fiber WK / Anodized Brown / FR4 WK / Anodized Brown / Aluminum WK / Anodized Brown / Polycarbonate WK / E-coating Snow / Carbon fiber WK / E-coating Snow / FR4 WK / E-coating Snow / Aluminum WK / E-coating Snow / Polycarbonate WK / Anodized Gray / Carbon fiber WK / Anodized Gray / FR4 WK / Anodized Gray / Aluminum WK / Anodized Gray / Polycarbonate WK / Anodized Burgundy Red / Carbon fiber WK / Anodized Burgundy Red / FR4 WK / Anodized Burgundy Red / Aluminum WK / Anodized Burgundy Red / Polycarbonate WK / E-coating Red / Carbon fiber WK / E-coating Red / FR4 WK / E-coating Red / Aluminum WK / E-coating Red / Polycarbonate WK / Anodized Cute / Carbon fiber WK / Anodized Cute / FR4 WK / Anodized Cute / Aluminum WK / Anodized Cute / Polycarbonate HHKB / Anodized Black / Carbon fiber HHKB / Anodized Black / FR4 HHKB / Anodized Black / Aluminum HHKB / Anodized Black / Polycarbonate HHKB / Anodized Silver / Carbon fiber HHKB / Anodized Silver / FR4 HHKB / Anodized Silver / Aluminum HHKB / Anodized Silver / Polycarbonate HHKB / Anodized Brown / Carbon fiber HHKB / Anodized Brown / FR4 HHKB / Anodized Brown / Aluminum HHKB / Anodized Brown / Polycarbonate HHKB / E-coating Snow / Carbon fiber HHKB / E-coating Snow / FR4 HHKB / E-coating Snow / Aluminum HHKB / E-coating Snow / Polycarbonate HHKB / Anodized Gray / Carbon fiber HHKB / Anodized Gray / FR4 HHKB / Anodized Gray / Aluminum HHKB / Anodized Gray / Polycarbonate HHKB / Anodized Burgundy Red / Carbon fiber HHKB / Anodized Burgundy Red / FR4 HHKB / Anodized Burgundy Red / Aluminum HHKB / Anodized Burgundy Red / Polycarbonate HHKB / E-coating Red / Carbon fiber HHKB / E-coating Red / FR4 HHKB / E-coating Red / Aluminum HHKB / E-coating Red / Polycarbonate HHKB / Anodized Cute / Carbon fiber HHKB / Anodized Cute / FR4 HHKB / Anodized Cute / Aluminum HHKB / Anodized Cute / Polycarbonate Quantity 1 2 3 4 5 6 7 8 9 10+ 1 Quantity Add to Cart Add to Cart EMAIL ME WHEN AVAILABLE Buy it nowMore payment optionsBuy it nowMore payment options Ready to use Tofu60 2.0 Keyboard With NP Blue Gray - WK / Anodized Black / Carbon fiber is backordered and will ship as soon as it is back in stock. SKU: ZH12973 by KBDfans Group buy updates Chat with us Share Share on Facebook Share on Twitter Pin it Specifications Case material: Aluminum (anodized and electrostatically coated process) Plate: PC/ Aluminum/ FR4/ Carbon fiber plate PCB: 1.2 mm Flex cut Hot-swap PCB/1.2 mm Non-Flex cut Solder PCB, QMK firmware, VIA support, without per-key RGB, USB-C port, with daughterboard+JST cable Weight bar: Brass material (transparent E-coating after sandblasting process) Structure: Top mount, silicone socks, silicone bowl (3 types of structural support) Weight: ≈1.5 kg after assembly Dimesion: 294.7 mm (length) x 115.7 mm (width) x 18.5 mm (front) x 32.5 mm (back) Feature: Screwless exterior design, the dachable silicon feet hiding all the screws at the bottom Typing angle: 7° Design by KBDfans Made in China Keycaps: PBTfans bow- Simple Base kit (SKU:PT03-2) Include Price $147 includes below items: Aluminum top and bottom case x1 Brass weight bar x1 Screws for top mount x1 set Silicone bowl (poron cotton for silicone bowl structure) x1 set Silicone socks x1 set Bottom poron x1 Plate poron x1 EVA switch pad x1 Cherry screw in stabilizers x1 set Rubber feet x1 set Keycaps Base kit x1 The following accessories should be purchased separately and added to the cart with the kit together: 1.2 mm Flex cut Hot-swap PCB x1 (+ $50 USD) or1.2 mm Non-Flex cut Solder PCB x1 (+ $45 USD) with daughterboard+JST cable Plate x1 (+ $19 USD) Dimension Building tutorial Building tutorial Tofu 2.0 Build Video Firmware Flash manual dztech_og60_via.uf2 og60.json The firmware of Tofu60 2.0 is same as OG60. Disclaimer About the case: 1. Keyboard case - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 2. Brass weight - If you see any resemblance of marks or foreign material under 2 mm (tool marks, stain, dent, sand mark, scratch, etc.), you're not eligible for Return & Refund. 3. Case interior - Based on the production method of anodizing and spraying, the product can lead to some smearing at the surface level, and you'll see some hook marks within the case. Also, the spraying process can not guarantee that the color will look 100% the same on the internal case corners. The color off on the interior case and the interior corners are not eligible for Return & Refund. 4. About the potential coating defects: Because the Faraday cage exists for this type of production method, it's going to be hard to coat the Interior corners perfectly. Insead of kill all the smoothness on the case coating, the interior painting job won't be as perfect as the exterior's. Attention: -Make sure to QC your keyboard case and weight before building it. For any issues besides the three above, please get in touch with our customer support agents to get help.-For anything built is not eligible for Return & Refund. Click for more 2 layouts available New design with 3 different mounting styles Tofu60 2.0 continues the design of the first generation. KBDfans does upgrade the structure this time. The 2.0 version supports three different mounting styles: Top Mount, Gasket Mount, Silicone bowl Gasket mount（Available in 3 different hardness silicone bowls）, which meant to provide three different typing experiences on one keyboard. Top mount Silicone bowl gasket Silicone socks gasket Click here for more about Tofu60 2.0 kit 

- Tofu60 2.0 Keyboard with NP Blue Gray is in stock for $220.00 USD
- Case options: Anodized Black, Anodized Silver, Anodized Brown, E-coating Snow, Anodized Gray, Anodized Burgundy Red, E-coating Red, Anodized Cute
- Plate options: Carbon fiber, FR4, Aluminum, Polycarbonate
- PCB options: 1.2 mm Flex cut Hot-swap PCB, 1.2 mm Non-Flex cut Solder PCB
- Layout options: WK, HHKB
- Split keys available
- Mounting style: Top mount
- Switch options: Cherry Black, Cherry Green, Cherry Grey, Cherry MX Ergo Clear, Kailh BOX Jade, Novelkeys x Kailh Cream, Gateron Ink V2 Black, Gateron Ink V2 Silent Black, Zeal Rosélios Silent Linear, Gateron Caps Milky Yellow, Gateron Oil King, Tecsee Sapphire, Tecsee Eclair Switch, Tecsee Purple Pandas, Eminence Switch, Emotoys Little Daisy Silent, Gateron G Pro 3.0 Red, Gateron G Pro 3.0 Brown, Gateron G Pro 3.0 Yellow, Gateron G Pro 3.0 Black, Gateron G Pro 3.0 Silver
- Switch lube service available
- Tape Mod Adding Service available
- Case material: Aluminum
- Weight bar: Brass
- Typing angle: 7°
- Keycaps: PBTfans bow- Simple Base kit
- Accessories included: Aluminum top and bottom case, Brass weight bar, Screws for top mount, Silicone bowl, Silicone socks, Bottom poron, Plate poron, EVA switch pad, Cherry screw-in stabilizers, Rubber feet, Keycaps Base kit
- Additional accessories available: PCB, Plate
- Building tutorial and firmware available
- Three different mounting styles available: Top mount, Silicone bowl gasket, Silicone socks gasket

60% Keyboard

All keyboards