The Kono 84 barebones keyboard showcases hot-swappable sockets, RGB lighting, and multi-device Bluetooth pairing! Create a unique, personal setup with your favorite switches and keycaps to make the perfect 75%.

Kono 84 Keyboard

Tray Mount
75% layout 
Soldered Version
Unassembled Case: Aluminum Material. Tofu84 Color: Black, Burgundy Red, E-coating Grey, Silver, Blue, Tiffany. 


PCB: KBD75 rev 2.0 soldered version; Type-C interface; RGB underglow; Support VIA and QMK; VIA firmware Download


Plate: Aluminum material 

Foam: PCB foam and Case foam

Stabilizers: Cherry screw-in stabs 60 set
USB Type-C Cable
Notes: the PCB Foam and the USB Type-C Cable was added for the orders after Jan 20th,2022 Assembly service: Click

Switches Option: Click

Carrying case: Click

PCB foam: Click

KBDfans handmade custom mechanical keyboard Type-C Cable: Link 

KBDfans Tofu84 75% Soldered Mechanical Keyboard DIY Kit

Epomaker TH80 Keyboard

Keydous NJ80 Barebones Bluetooth RGB Hot-Swappable Keyboard

Layout: 75% layout

Structure: Gasket Mount

Case: D84 V2 top aluminum case and bottom aluminum/ acrylic case 

Typing Angle: 7°


Weight bar: Aluminum material, weight bar color matches up with upper case

Hot-swap PCB: KBD75 hot swap PCB (SKU:DP3259)(Type-C interface, with RGB underglow, no Per-key RGB) compatible with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84 keys), one layout ONLY for hot-swap PCB.


Soldered PCB: KBD75 Rev 2.0 soldered PCB (SKU:PCB0005) (Type-C interface, with RGB underglow), compatible with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard.


Plate: D84 V2 Brass/Aluminum/Polycarbonate Plate

Stabilizers: Cherry screw-in stabs 60 sets (SKU:DP0003)


Foams: Case foam + PCB foam + Gaskets

Designer: KBDfans Wei

Friendly Reminds: Due to the optimization of the internal structure of the case, the Plate, Case of D84 version 1 and version 2 are incompatible with each other. Case x1
PCB x1
Plate x1
Stabilizers x1 set
USB A to C Cable x1
PCB foam x1
Case foam x1
Gaskets x1 set
Rubber feet and screws KBDfans handmade custom mechanical keyboard Type-C Cable: Link QMK Flash Manual Link
Hot-swap PCB firmware: kbdfans_kbd75hs_via.hex

Solder PCB firmware: kbdfans_kbd75_rev2_via.hex 

D84 V2 75% Gasket Mount Mechanical Keyboard DIY KIT

Soldered vesrion: KBD75 Rev 2.0 PCB (PCB0005) (RGB underglow), also fits with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard


Hot-swap version: KBD75 hot swap PCB (RGB underglow, no Per-key RGB) , fits with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84keys), not support other layouts.

Typing angle: 7°

Interface: Type-C

Case: Top-mount, Aluminum material 75% layout, Acrylic mid-layer

Plate: Brass/ Aluminum/ Polycarbonate Plate

Stabs: Cherry screw-in stabs 60set x1

PCB foam: Put it between PCB and Plate

Case foam: Put it between PCB and Case

Weight bar: Aluminum material default (KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case) PCB x1
Case x1
Plate x1
PCB foam x1
Case foam x1
Stabs 60 set x1
USB-C cable x1
Screws and rubber feet Assembly service: Click

Keycaps collection: Click

Carrying case: Click 

KBD75 V3.1 Black Brass Weight Bar Click

KBDfans handmade custom mechanical keyboard Type-C Cable: Link Flash Manual: Click 

Solder PCB firmware: kbdfans_kbd75_rev2_via.hex 

Hot-swap PCB firmware: kbdfans_kbd75hs_via.hex 

KBD75 V3.1 Mechanical Keyboard DIY KIT

Soldered PCB: KBD75 Rev 2.0 solder PCB (with RGB underglow, no Per-key RGB on top, Type-C interface)(SKU: PCB0005)

Hot-swap PCB: KBD75 hot swap PCB(with RGB underglow, no Per-key RGB on top, Type-C interface) (SKU: DP3259)

Typing angle: 7°

RGB: Both PCB come with RGB underglow


PCB Port: Type-C

Case Material: Aluminum

Layout Size: 75% 

Structure: Top-mount


Plate: Brass/ Aluminum/ Polycarbonate Plate

Stabs: Dyboox PC screw-in stabs 60 set - purple(SKU: DP3085)

Weight bar: Aluminum

Keycaps: Cherry Profile Simple Purple Dye-sub Keycaps (SKU: DP2994) KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case
Soldered PCB is compatible with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard

Hot-swap PCB is compatible with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84 keys) PCB x1
Purple Case x1
Plate x1
Acrylic mid-layer
PCB foam x1
Case foam x1
Stabilizers set x1
Keycaps set x1
USB-C cable x1
Screws and rubber feet Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click

Soldered version firmware: kbdfans_kbd75_rev2_via.hex

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Fully Assembled KBD75 V3.1 Violet Purple Mechanical Keyboard with Simple Purple Dye-sub Keycaps

IDOBAO ID80 Crystal Gasket Barebones Keyboard

IDOBAO ID80 Crystal Gasket Keyboard Kit – Drop Exclusive

Structure: Top Mount

Hot-swap PCB: KBD75 hot swap PCB(with RGB underglow, no Per-key RGB on top, Type-C interface) (SKU: DP3259)


Typing angle: 7°

Case: Gray case, Top-mount, Aluminum material 75% layout, Acrylic mid-layer

Plate: Polycarbonate Plate

Stabs: Cherry screw-in stabs 60set

Keycaps:  ePBT Gray&White ABS Doubleshot Keycaps Set (SKU: DP0618)


PCB foam: Put it between PCB and Plate

Case foam: Put it between PCB and Case

Weight bar: Aluminum material default (KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case) PCB x1
Case x1
Plate x1
Keycaps set x1
PCB foam x1
Case foam x1
Stabilizers 60 set x1
USB-C cable x1
Screws and rubber feet Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Fully Assembled KBD75 V3.1 Gray Hot-swap Mechanical Keyboard With ePBT Gray&White ABS Doubleshot Keycaps

Ocean Star 3084 SP

Structure: Top Mount

Soldered PCB: KBD75 Rev 2.0 solder PCB (PCB0005) (with RGB underglow), also fits with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard.


Hot-swap PCB: KBD75 hot swap PCB (RGB underglow, no Per-key RGB), fits with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84keys), not support other layouts.


Typing angle: 7°

Interface: Type-C

Case: Top-mount, Aluminum material 75% layout, Acrylic mid-layer

Plate: Brass/ Aluminum Plate

Stabs: Cherry screw-in stabs 60set x1

Keycaps: DP2787


PCB foam: Put it between PCB and Plate

Case foam: Put it between PCB and Case

Weight bar: Aluminum material default (KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case) PCB x1
Case x1
Plate x1
Keycaps x1
PCB foam x1
Case foam x1
Stabs 60 set x1
USB-C cable x1
Screws and rubber feet Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click

Soldered version firmware: kbdfans_kbd75_rev2_via.hex

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Fully Assembled KBD75 V3.1 Mechanical Keyboard With Cement Grey Japanese Keycaps

Layout: 75% layout

Structure: Gasket Mount

Case: D84 V2 top aluminum case and bottom aluminum/ acrylic case 

Typing Angle: 7°


Weight bar: Aluminum material, weight bar color matches up with upper case

Hot-swap PCB: KBD75 hot swap PCB (SKU:DP3259)(Type-C interface, with RGB underglow, no Per-key RGB) compatible with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84 keys), one layout ONLY for hot-swap PCB.


Soldered PCB: KBD75 Rev 2.0 soldered PCB (SKU:PCB0005) (Type-C interface, with RGB underglow), compatible with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard.


Plate: D84 V2 Brass/Aluminum/Polycarbonate Plate

Stabilizers: Cherry screw-in stabs 60 sets (SKU:DP0003)


Foams: Case foam + PCB foam + Gaskets

Designer: KBDfans Wei

Friendly Reminds: Due to the optimization of the internal structure of the case, the Plate, Case of D84 version 1 and version 2 are incompatible with each other. Case x1
PCB x1
Plate x1
Stabilizers set x1
USB A to C Cable x1
PCB foam x1
Case foam x1
Gaskets set x1
Rubber feet and screws Handmade Custom Mechanical Keyboard USB-C Cable: Click QMK Flash Manual Link
Hot-swap PCB firmware: kbdfans_kbd75hs_via.hex

Solder PCB firmware: kbdfans_kbd75_rev2_via.hex 

Assembled D84 V2 Gasket Mount 75% Mechanical Keyboard

Soldered PCB: KBD75 Rev 2.0 solder PCB (with RGB underglow, no Per-key RGB on top, Type-C interface)(SKU: PCB0005)

Hot-swap PCB: KBD75 hot swap PCB(with RGB underglow, no Per-key RGB on top, Type-C interface) (SKU: DP3259)

Typing angle: 7°

RGB: Both PCB come with RGB underglow


PCB Port: Type-C

Case Material: Aluminum

Layout Size: 75% 

Structure: Top-mount


Plate: Brass/ Aluminum/ Polycarbonate Plate

Stabs: Cherry screw-in stabs 60 set (SKU: DP0003)

Weight bar: Aluminum

Keycaps: Cherry Profile PBT dye-subbed Simple Grey 157 keys (SKU: DP2995) KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case
Soldered PCB is compatible with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard

Hot-swap PCB is compatible with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84 keys) PCB x1
Case x1
Plate x1
Acrylic mid-layer
PCB foam x1
Case foam x1
Stabilizers set x1
Keycaps set x1
USB-C cable x1
Screws and rubber feet Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click

Soldered version firmware: kbdfans_kbd75_rev2_via.hex

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Fully Assembled KBD75 V3.1 E-white Mechanical Keyboard with Simple Grey Keycaps

Structure: Gasket Mount

Case: D84 V2 aluminum case- black/gray/e-white

Typing Angle: 7°


Hot-swap version: KBD75 hot swap PCB (SKU:DP3259) (Type-C interface, with RGB underglow, no Per-key RGB on top), compatible with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84 keys), one layout ONLY for hot-swap PCB.


Plate: Polycarbonate Plate

Stabs: Cherry screw-in stabs 60set

Keycaps:  MAXKEY Foundation SA Keycaps Set - Base kit, Kit 1 (SKU:DP0231 JM0786)


PCB foam: Put it between PCB and Plate 

Case foam: Put it between PCB and Case

Weight bar: Aluminum material PCB x1
Case x1
Plate x1
Keycaps Base set x1
Keycaps Kit1 set x1
PCB foam x1
Case foam x1
Gaskets set x1
Stabilizers 60 set x1
USB A-C cable x1
Screws and rubber feet Handmade Custom Mechanical Keyboard USB-C Cable: Click KBD75 Hot-swap QMK Flash Manual
Firmware link: kbdfans_kbd75hs_via.hex 

Fully Assembled D84 V2 Hot-swap RGB Underglow Mechanical Keyboard With MAXKEY Foundation SA Keycaps

Structure: Tray Mount

Layout:75% layout 

Case: Tofu84 case

PCB: Soldered Version (KBD75 V2 Soldered version PCB), RGB underglow, NOT Per-key RGB

Plate: Aluminum plate

Keycaps: Cherry Profile Cement Grey Japanese PBT Dye-Sub Keycaps Set (SKU: DP2787)


Stabilizers: Cherry screw-in stabs 60 set

Foam: PCB Foam and Case Foam

Interface: USB-C Case x1
PCB x1
Plate x1
Cherry screw-in stabs 60 set x1
USB-C cable x1
PCB Foam x1
Case Foam x1
Keycaps x1 (SKU: DP2787) Carrying case: Click

KBDfans Standoff Silicone Cover: Click

KBDfans Handmade Custom USB-C Cable: Click The PCB has come pre-flashed with VIA compatible firmware already. So when you plug the keyboard in, the VIA program should detect your board automatically
kbdfans_kbd75_rev2_via.hex 

Fully Assembled Tofu84 75% Soldered Mechanical Keyboard with Cement Grey Japanese PBT Keycaps

Black&Gold 3084B Plus

Anodized aluminum case
KBD75 Rev 2.0 Soldered PCB 
Brass plate/ Alu plate(tofu84) support to split spacebar (The Tofu84 Plate is compatible with KBD75 v2 case, KBD75 V2 Plate isn't compatible with Tofu84 case)
Cherry screw-in stabs 60 set (The order placed after 3/14/2021)
Screws and rubber feet
Acrylic mid-layer KBDfans handmade custom mechanical keyboard Type-C Cable: Link Fully programmable via QMK software
RGB Underglow
Compact and efficient 75% layout
Made in China 

KBD75 V2 Soldered Customized Mechanical Keyboard DIY KIT

Structure: Top Mount

Soldered PCB: KBD75 Rev 2.0 solder PCB (PCB0005) (with RGB underglow), also fits with KBD75 v1/ v2/ v3 Keyboard, Tofu84 Keyboard, D84 Keyboard.


Hot-swap PCB: KBD75 hot swap PCB (RGB underglow, no Per-key RGB) , fits with KBD75 v3/ v3.1, D84 keyboard. Fixed layout (84keys), not support other layouts.


Typing angle: 7°

Interface: Type-C

Case: Top-mount, Aluminum material 75% layout, Acrylic mid-layer

Plate: Brass/ Aluminum Plate

Stabs: Cherry screw-in stabs 60set x1

PCB foam: Put it between PCB and Plate

Case foam: Put it between PCB and Case

Weight bar: Aluminum material default (KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case) PCB x1
Case x1
Plate x1
PCB foam x1
Case foam x1
Stabs 60 set x1
USB-C cable x1
Screws and rubber feet Keycaps collection: Click

Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click 

Soldered version firmware: kbdfans_kbd75_rev2_via.hex

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Assembled KBD75 V3.1 Mechanical Keyboard

Tray Mount
75% layout 
Soldered Version Case: Tofu84, Aluminum/Acrylic Material

PCB: Soldered version; Type-C interface; RGB underglow; Support VIA and QMK; VIA firmware Download


Plate: Aluminum material

Foam: Case foam (Put between case and PCB)

Stabilizers: Cherry screw-in stabs 60 set

Cable: USB-C Carrying case: Click

PCB foam: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click 

Assembled Tofu84 75% Soldered Mechanical Keyboard

Structure: Tray mount
Anodized KBD75 V2 aluminum case
KBD75 PCB (RGB underglow, soldered version)
Brass plate or Aluminum plate (Tofu84 Aluminum plate)  
Cherry screw-in or GMK screw-in stabs
Screws and rubber feet
Acrylic mid-layer
USB-C cable Handmade Custom Mechanical Keyboard USB-C Cable: Click 

Assembled KBD75 V2 Soldered Mechanical Keyboard

Structure: Top Mount

Hot-swap PCB: KBD75 hot swap PCB(with RGB underglow, no Per-key RGB on top, Type-C interface) (SKU: DP3259)


Typing angle: 7°

Case: Top-mount, Aluminum material 75% layout, Acrylic mid-layer

Plate: Polycarbonate Plate

Stabs: Cherry screw-in stabs 60set

Keycaps:  ePBT Curtain of Night ABS Doubleshot Keycaps Set (SKU: DP1244 )

Foams: PCB foam and Case Foam (which will absorb the noise generated by typing and make it sound better)

Weight bar: Aluminum material default (KBD75 V2 Brass weight bar doesn't fit KBD75 V3.1 Case) PCB x1
Case x1
Plate x1
Keycaps set x1
PCB foam x1
Case foam x1
Stabilizers 60 set x1
USB A-C cable x1
Screws and rubber feet Carrying case: Click

Handmade Custom Mechanical Keyboard USB-C Cable: Click Flash manual: Click

Hot-swap version firmware: kbdfans_kbd75hs_via.hex 

Fully Assembled KBD75 V3.1 Hot-swap Mechanical Keyboard With ePBT Curtain of Night ABS Doubleshot Keycaps

3084S Shine-Through Black

3084S Shine-Through White

Keychron K2 RGB Aluminium

GMMK PRO

Glorious GMMK Pro Kit ISO/ANSI

The Stacked75 is a continuation of our Stacked series — a line of budget oriented stacked acrylic keyboard kits from CannonKeys! This board is designed out of 3mm thick layered acrylic pieces, and has a very distinctive acrylic case sound.

Stacked75 Keyboard Kit

The Practice75 is a keyboard kit that contains almost everything you need to build your own keyboard from scratch - just add switches, stabilizers, and keycaps, and you'll be good to go! It's meant to be a great starting point for beginners - this time in a 75% layout!

Practice75 Keyboard Kit

The Obliterated75 is a 75% CNC aluminum keyboard in our Brutalist Series of in stock keyboards. The solderable PCB included is QMK/VIA supported and USB-C. The mounting style is a slightly modified top mount called burger mount. It takes the evenness from top mount and uses o-rings on the mounting screws to make the typing experience slightly less harsh.

Obliterated75 Keyboard (Aluminum)

The Obliterated75 is a 75% polycarbonate keyboard in our Brutalist Series of in stock keyboards. The solderable PCB included is QMK/VIA supported and USB-C. The mounting style is a slightly modified top mount called burger mount. It takes the evenness from top mount and uses o-rings on the mounting screws to make the typing experience slightly less harsh.

Obliterated75 Keyboard (PC)

The Godspeed75 is a 75% top mount keyboard featuring a USB-C daughterboard and USB-A hub. Designed by fropsie & BlindAssassin111.

75% Keyboard

All keyboards