Note: Breeze cases have moved to their own product page here -> Breeze - 3D Printed Case Kit
The Breeze Split Keyboard is the ideal starting point for any mechanical keyboard enthusiast that is willing try something new. Something... better. Most smaller keyboards are a game of compromises, meaning you'll need to get the hang of a bunch of key combinations to get to anything but the absolute basics. The Breeze Split Keyboard is basically a TKL (tenkeyless) keyboard minus the function row. Plus, a free 2x3 macro pad included with every PCB kit.
The base PCB kit contains:

2x PCBs (one for either hand) with diodes pre-soldered
2x Reset button
2x TRRS receptacle
Free 2x3 macropad
Pro Micro / Elite-C compatible

The socket kits contain 70 sockets of either the MX or Choc variant.The keycap kits contains 70x 1U keycaps, 2x 1U homing keycaps and 2x 2U keycaps. 
For a complete keyboard you need the following parts:
1. The base Breeze PCB kit (this product)
2. A pair of controllers. You can either get a set of Arduino Pro Micros (or clones) or select the Elite-C V4 2-pack above. The Elite-C is currently the best bang for buck controller based on the ATMega 32U4 chipset and has a sturdy USB connector.
3. A hotswap socket kit. Contains 70 sockets of either the Choc or MX variant.4. Keycaps. MBK Keycaps go great with Choc switches (they won't fit MX switches).
5. Switches (see related products below!)
6a. An aluminum plate kit (currently MX only), which consists of 2 plates (left and right), spacers and a set of hex bolts.
6b. An even lighter weight option that is easier on the wallet to boot? We have the same plates available in black FR4 for either MX or Choc switches.
7. Complete the set with the original Breeze enclosure. Previously only available in white, but now in gray, black and blue as well. To not make this product page to complicated, we have given the cases its own product page here: Breeze - 3D Printed Case Kit.
8. 1x TRRS Cable. Preferably something around 1ft / 30cm long.
9. A free evening to build it using the build guide on the Afternoon Labs website.Note: Batteries cannot be shipped outside the US.

Breeze Split Keyboard

Note: This is a Group Buy for an updated re-run of the Hot Dox V2 that launched April 26 and closes June 12 Estimated arrival is end of Q4 2023. Join the Group Buy for early bird pricing!The Hot Dox V2 is more than a typical ErgoDox — the hot swap switches allow you to easily swap in all your favorite switches, no soldering required. This is a great way for newcomers and long-time hobbyists to enter the world of ergonomic mechanical keyboards. The V2 is pre-assembled, has a layer indicator screen, RGB Backlighting, and all USB Type C connectors. One of the most requested feature on the V1 was to be able to use the Hot Dox halves independently, and this is now possible on the V2. Choose between the Dark and Light themes, with or without keycaps, and which switches, if any, that you would like. The white keycaps are only available with the Light themed board, and the black keycaps are only available with the Dark themed board. dark mode Come to the dark side with the Hot Dox V2 - Dark, a sleek and shadowy edition of the highly-customizable keyboard. The metal plate layers are anodized in a stylish black finish and complemented by black-on-black dye-sub keycaps. Even the hardware screws have been given the all-black treatment, completing the keyboard’s distinctive monochromatic look. With all the same exceptional features and functionality of the original Hot Dox V2, the Dark version is designed for those who want to add a dash of intrigue to their desktop. Manual & Flashing File Downloads Hot Dox V2 Manual (PDF) Hot Dox V2 VIA Flashing .json (VIA Hex File) Right click, save link as hot-swap is the future
Using the included switch puller, you can quickly remove and replace any switches to create your own personalized typing experience. You can try using lighter switches for your pinky fingers, modify your own switches with lube or different springs, and explore the endless configurations to your heart's content.
acrylic and aluminum
The Hot Dox's aluminum switch plate is comfortably sandwiched between layers of transparent acrylic and secured with hex screws, providing a clear view of the inner workings of the keyboard. The abundance of LEDs illuminates the case and provides even more options for customization.
left, right, or left & right
The Hot Dox V2 comes with a highly requested community feature set for an ErgoDox design - the ability for the keyboard halves to be used independently. It can be configured to be used in five ways - left hand only, right hand only, left hand as master with right hand connected to left hand, right hand as master with left hand connected to right hand, and finally both halves being connected as two independent keyboards to the computer.
pbt keycaps
The included keycaps are PBT plastic in DSA profile with crisp, dye-sublimated legends on the alphas in black, leaving the surrounding keycaps blank. PBT is a superior plastic that strongly resists wear, finger grease, shine and yellowing and the wonderful texture is a welcome bonus on any mechanical keyboard. We chose the DSA profile because it is a flat profile, and you can rearrange the alpha keys easily for alternative layouts like Dvorak or Colemak. If you would prefer blank keycaps, you can purchase our compatible black PBT keycaps. Note: This keyboard includes standard, non-coiled USB cables. For an even more premium look, check out our USB-C to USB-C coiled cable for connecting the two halves of the Hot Dox V2 (Kono Coiled Ergodox Cable) firmware
The Hot Dox V2 is easily configurable with VIA. VIA allows for four individual custom layers, configured in real-time without any need for flashing software.
Hot Dox V1 firmware is not compatible with the Hot Dox V2. Please follow the manual and download the proper files for proper flashing (available at the top of this page).
switch options
The Hot Dox V2 lets you choose between the two high quality Kailh switches below, or a barebones keyboard so you can install your own switches at a later date. Both of these switch options were selected specifically for this ergonomic keyboard. The Kailh Speed Copper switch has an early activation which helps to limit finger strain and is a medium weight tactile switch. The Kailh BOX Rose switch is the most modern linear switch from Kailh and its lightweight spring is lovely to type on. Kailh Speed Copper – Tactile:50g Activation / 60g Bottom Out | 1.1mm activation | 3.5mm travel Kailh BOX Rose Red Switch – Linear:45g Activation force | 1.8mm Pre-travel | 3.6mm total travel features 76 key split ergonomic layout
Hot-swap sockets for easy customization and assembly
VIA firmware — customize layouts, layers, and lighting easily
Acrylic and aluminum case-plate sandwich for comfort and style
Optional PBT DSA keycaps
Optional switches — 76 total
One (1) year manufacturer warranty against production defects
Switch and keycap puller included
USB cables included (USB-C to USB-A uncoiled cable to connect to your computer and a USB-C to USB-C uncoiled cable for connecting the two halves of the Hot Dox. Optional coiled cable available.)

- The Hot Dox V2 is an ergonomic mechanical keyboard with hot swap switches that allow for easy customization without soldering.
- It comes pre-assembled with a layer indicator screen, RGB backlighting, and USB Type C connectors.
- The keyboard can be used in five different configurations - left hand only, right hand only, left hand as master with right hand connected to left hand, right hand as master with left hand connected to right hand, and both halves connected as two independent keyboards to the computer.
- The keyboard has an acrylic and aluminum case-plate sandwich for comfort and style, and optional PBT DSA keycaps in white.
- The VIA firmware allows for easy customization of layouts, layers, and lighting.
- The keyboard comes with a one-year manufacturer warranty against production defects and includes a switch and keycap puller, as well as USB cables.

ErgoDox 76 "Hot Dox" V2 Mechanical Keyboard

Customer Reviews
    
      
      Be the first to write a review
    
  
Write a review

    
  



  
    
      
      Name
      
      
        (displayed publicly like
        
          
            
               John Smith
            
               John S.
            
               J.S.
            
               Anonymous
            
          
          
        
        )
      

      
    

    
       
      Email
      
    

    
      Rating
      
    

    
      
      Review Title
      
    

    
      
      Review
      
    

    

    

    
  


  
  

    

    

      Picture/Video (optional)
      


      
    BackNext

    
      Rating
      
    BackNext

    
      
        Name
        
      

      
        Email
        
      
    BackNext

    
      
        Review Title
        
      

      
        Review
        
      
    BackNext

Breeze Aluminum Plate Kit

Corne v3

Put your Breeze Split Keyboard in a nice (set of) cases.Comes with a left and right case. Professionally 3D Printed with brass threaded inserts for easy assembly. Available in any color you want, as long as that color is either white, gray, black or blue. Photos of the gray, black and blue cases coming soon!Does NOT include the Breeze PCB Kit!

Breeze - 3D Printed Case kit

NOTE: this is a pair B-Stock cases, these cases are not eligible for returns, refunds or replacements and are sold as-is. Cases will have some printing artifacts (uneven bottom, inclusions, stringing, etc). This is a "while supplies last" deal. Regular stock can be found here: Breeze - 3D Printed Case kitPut your Breeze Split Keyboard in a nice (set of) cases.Comes with a left and right case. Professionally 3D Printed with brass threaded inserts for easy assembly. Available in any color you want, as long as that color is white.Does NOT include the Breeze PCB Kit!

Split Keyboard

All keyboards